What's in her name?

What's in her name (Salish Aire)?

Salish
from her new home the Salish Sea

Aire as in a melody of song.

Salish + Aire = The melody of the Salish Sea.

Salish Sea:
In the late 1700's Captain George Vancouver wandered around the waters of what are now known as British Columbia, Canada and Washington State, USA. He did the usual 1700's explorer thing and put names he chose on everything he saw. The names stuck and are recognized and used to this day.

New lines were added to Captain Vancouver's charts in 1872 (after a near war with Great Britain over a pig) which made waters on one side of the line Canadian and those on the other side of the line American.

It wasn't until 1988 (officiated in 2009) that someone finally realized that fish and various critters, (to say nothing of the water itself) were never involved in the boundary treaties and really ignored them completely. (This is best illustrated by the problems that Homeland Security has with Canadian Canada Geese and American Canadian Geese - it seems they refuse to carry passports and have been known to poop on the head of any border patrol person who tries to challenge their right to cross the border when and where they choose!) In reality the waters from Olympia to the well up the East side of Vancouver Island are pretty much one ecosystem.

The Coast Salish are the indigenous peoples who live in southwest British Columbia and northwest Washington state along the Salish Sea and share a common linguistic and cultural origin. The Salish Sea is named in honor of the earliest recorded peoples who plied her waters and learned to live in harmony with her.


Tuesday, September 13, 2016

Lift out and Naiad repair 2016

For a description of our Naiad Stabilizer system work click the link in the upper right or go directly to Naiad Repair 2016


Day 1 (Thursday)
September 8, 2016

We left our home port of Everett early as we had been warned by the Port of Port Townsend that boats would start arriving today for the annual Wooden Boat Festival.  When we pulled into a slip at 12 noon we could see that it was a good thing we had left early as there was a steady stream of boats all heading to the same destination.



We have already checked in with the yard office and filled out the paperwork needed to get the boat lifted from the water and blocked while we work on it.  We have also checked out the yard and area for bathroom, grocery, marine store, and bus route locations.  We are second in line for tomorrow with a planned 9 AM lift time.  At this point we have our fingers crossed that all will go as planned.

Day 2 (Friday)
September 9, 2016

Salish Aire lifted out this morning slightly ahead of our 9 AM scheduled time.  The lift went smoothly and then the boat was moved to the pressure wash pad (where the port provides 2 industrial grade pressure washers and the water is all filtered before going into the sewer system).  The lift price comes with the 2 wash guns for 30 minutes and the owner provides the labor.  John Gray showed up as planned just as the boat was lifted and he and I operated the guns as quickly and completely as we could since we knew that any gunk we could get off with the pressure washers would save lots of labor later.  We ended up having to purchase an additional 15 minutes of wash time but the boat looked good when we were done.  Next the Travel Lift carried the boat to the front of Haven Boat Works who is helping us with the project (they were chosen for 1) knowledge of Naiad systems and 2) a willingness to allow us to do as much of our own work as we are able.



Salish Aire currently sits on blocks on a mat of blue tarps designed to catch any gunk we get onto the ground since the area we are in is a gravel lot.  We are getting 30 amp power from Haven. We are required to use a sander with a vacuum cleaner attached to it for any sanding work.  It’s a short walk to either a Port owned public restroom or Haven has provided us a key so we can access there shop toilet 24 hours a day if needed. We are doing everything we can to protect our 50 gallon capacity black (aka: sewage) water tanks from needing to be emptied. The bathroom sinks drain into a very small sump so we are using them for teeth brushing type activities only as we have turned off the sump drain pump. The kitchen sink drains by gravity and we have duct taped a hose from it to a five gallon bucket.  Clarice planned ahead with hand sanitizer and paper plates to minimize the need to wash hands or dishes.  We have 240 gallons of fresh water on board and can refill from Haven’s hose if needed.  The port has a shower and laundry facility about a block away that we are using.  We have to climb about a 10 ft ladder to get up to the boat deck and are lowering and raising tools and supplies with a rope for light stuff or the crane for heavy stuff.  Jarvis gets carried up and down the ladder.  Clarice uses her knee and her good foot to climb the ladder.



It’s always a bit nerve racking when taking the boat out wondering what we will find as boat work tends to always be expensive work.  We were pleased to find that even though we have not dove under the boat for a number of months that the bottom was in pretty good shape.  The paint that was applied in 2014 was still thick enough it likely could have gone another year.  We had a fair number of barnacles on the keel cooler, rudder skeg, the folding propeller and its shaft, and the aft edge of the main propeller.  We also had a lot of scum but no serious kelp or grass growth. Our zincs were all still serviceable except for on the bow thruster and the main propeller shaft.  We knew we had a ding on the bottom of the keel from a minor hitting the bottom event and it looked smaller out of the water than it did when I dove under it.  All in all the overall bottom condition was pretty good.

My brother in law, Darrel joined John and Clarice in doing bottom prep work the rest of the day.  Further prep work included sanding off the scum line from our marina in Everett, washing off the areas we couldn’t reach with the pressure washers because they were under the Travel Lift Straps, and sanding out the bottom ding and applying epoxy putty to it.  At this point we will do a once over in the morning and then a fresh water wipe down to get any dust and then we should be ready to paint.  Hopefully the weather will be like today which was perfect for this kind of work.







I also met with the guy who is going to work with me on the Naiad rehab project and talked about the plan of action. I indicated that I wanted to try to remove the fins with the manual screw-in tool I had purchased from Naiad to see how well it worked.  I was very pleasantly surprised that despite everything I had read and heard that the really really preferred way to remove the fins was with a hydraulic tool that the manual tool worked very well.  I have removed the port side seals and bearing cover and found that the cast case of the fin has rusted a bit.  Clearly it has not leaked and I don’t think there is much to be done at this point but it was not what I wanted to find.

Day 3 (Saturday)

September 10, 2016

Darrel stayed in the pilot house berth for the night and was a great help in getting a LOT done today.  We hadn’t planned to sand the hull at all but a review of the instructions on the paint can indicated it should be sanded with 80 grit (we had 60 grit on hand and used it instead) to provide for better adhesion of the new paint. We all took turns with the sander and washing the sanding dust off and were able to get the whole boat done in a fairly quick amount of time.  Then we applied the first coat of green Micron CSC bottom paint with rollers.  We had this huge task done by about 1 PM and ate lunch at the Blue Moose CafĂ© where we quickly became aware of how much blue sanding dust was in Darrel and my hair (we both have very white hair naturally so it really was obviously blue) when everyone commented on the blue haired guys.  We tried using the excuse that we were just being loyal Sea Hawk fans but folks didn’t seem to fall for it.



This is also the weekend on one of the biggest (if not THE biggest) wooden boat festivals in the world here in Pt Townsend.  Darrell and I took a break for the afternoon and rode a shuttle bus from the marina where Salish Aire is located (and where they are parking festival overflow cars) down to the main event location.  There were lots of amazing wooden boats and displays to check out so this provided a great diversion and break.  The wind came up while we were at the festival and we were able to watch a local “tall ship” schooner really show her stuff rather than just raising her sails for the tourists.

We did have the pleasant surprise of being serenaded by a bag piper this morning.




Darrel left for his very long drive home when we got back to the boat.  Clarice tried to find a way to spray paint all but the main propeller with Barnacle Buster paint but it was a real challenge as the wind had really kicked up by then.  In the mean time I finished disassembling the port stabilizer fin and am now confident that I know how to approach the starboard fin (which is a bit harder to access on the upper (in-boat) end). 

This evening we both walked pretty slowly to and from the showers and expect to crash when we get to bed as we are exhausted but very pleased with the progress we have made so far.

Day 4 (Sunday)
September 11, 2016

Many people (including us) will always remember September 11th as the day the Twin Towers were attacked by terrorist.  Sadly that event turned a very happy event in our lives into a time of joining the local community in mourning at the cathedral in Seattle.  September 11, 2001 was our 25th wedding anniversary.  Today is our 40th!!.  To celebrate the event we joined in worship at the Episcopal church here in Port Townsend and Clarice got a matching necklace and earrings with rubies in them for our ruby anniversary (and it is also her birthstone).



After our ride from church brought us back to the boat we were quickly hard at work putting on the second coat of bottom paint.  Before I purchased the paint I checked with the company who had painted it in 2014 and was assured that they had used 4 gallons of the same paint we are using this time around.  At $225 / gallon it is expensive enough that we didn’t want to buy more than we needed.  We also chose a less common color of green to cover the previous blue (as the paint wears away it is easier to tell how much is left if it is painted a different color each time).  We now believe that that previous painter didn’t add the extra gallon he needed to buy to his records as we have run short of what we need.  West Marine was open today and carries the right paint but only in black.  We almost made this work by designating the lowest section of the keel as an area to be a different color but even with that plan we only ended up with 1 cup of green which is not enough to paint the spots where the boat support stands hit the boat.  This evening I tried looking through the window of the chandlery here in the marina with first binoculars and then our longer lens camera.  I can see they have the right paint but I can’t read the colors and believe that the samples on the label are NOT green.  We are hoping that we can call a place in Seattle that sells retail to us and wholesale to many of the chandleries in the area and see if they can send a gallon this way on their usual delivery run.

We also finished disassembling the second stabilizer and doing some of the prep work to get ready to reassemble them.  It is now clear that when we were told that they might have water intrusion that the technician didn’t know what he was looking at.  Clearly the fluid that drained out (and also drained a bit today) is thin oil that normally separates from grease over time.  The bearing show their age of 20 years but they could easily have provided a number of more years of service.  It doesn’t hurt my feelings at all to know they have been fully serviced at this time but I do mind paying very high labor rates only to be given very poor advice.  The main shafts are showing wear in the seal areas so likely they will be replaced with the next set of seals.  The good news is that now I am very comfortable that I can do the work myself.




Now we are both exhausted and it is time for bed.

Day 5 (Monday)
September 12, 2016

All efforts at getting more green paint delivered to Port Townsend by commercial means failed so once again my brother in law, Darrel (with my sister, Margie) hot footed it clear up from Yelm to Port Townsend via Fisheries Supply in Seattle. 

Once we had the paint plan in place I conferred with the master mechanic I’m working with.  I asked if he had the special grease we need in large quantity and the answer was no.  I figured with Darrel coming vie Seattle I could find a supply house there with some and have him pick it up to no avail.  Finally out of sheer frustration I walked over to the local chandlery who keeps a small stock for one brand of outdrive that calls for it.  I phoned Naiad who indicated a single 10 oz tube for each side should fill the mechanisms up so I bought 2 tubes for each side just to be safe.  In the end I needed 3 tubes for each side which took the entire supply of the lubricant in Port Townsend.

At this point we have the port stabilizer completely installed (woo hoo) and the starboard unit sealed from the sea with only actually mounting the fin left for underwater work to do before we can launch.  Clarice finished the painting while I concentrated on the stabilizers. Since we only have about an hour of “mandatory” work yet to do, we have asked the Port to put us on the standby list for launching tomorrow.  



An unexpected problem also got addressed while we were here.  Our anchor rollers are pretty non-standard and were deteriorating rather quickly (summary: they looked very tacky to Clarice’s eye).  Another Nordhavn 46 is anchored in the bay and the owner of Ocean has stopped by a couple of times.  He mentioned while he was looking at the boat that there is a person in the area who has made a cottage industry of making odd size anchor rollers and other hart to find parts for boats.  Looking at his web site we realized that while is work is very pricey, the quality is far beyond anything on the general market.  He came down and measured the boat yesterday and his wife brought by the new rollers today.  They are completely custom with even port and starboard being slightly different.

Day 6 Tuesday SPLASH!!
September 13, 2016

This morning we mounted the final fin and did some touch-up on the paint as well as installed several zincs then we had a call from the port office asking us to come down and settle up our bill.  While I was there the very helpful office person checked on our chance of being lifted in despite the long standby list – answer: we could be launched next if we fit their smaller Travel Lift.

Clarice and I buckled up the final items such as shore power, final garbage, etc. and our chariot arrived.  The lift operators here in Port Townsend work as a great team and keep three huge machines running carrying millions of dollars worth of boats on a very tight schedule.  They lifted the boat and then gave us a chance to sand and paint where the blocks had been under the keel (one operator even grabbed a paint roller when he noticed a couple of spots that weren’t to his satisfaction).  We were splashed, we did a quick leak check (all was well) and we were off as the historic replica Lady Washington was lifted in the large lift dock.








We are now in a guest berth in Port Townsend where we finished connecting up and filling the oil reservoir of the Naiad stabilizers – so far everything seems to be working as I would expect prior to all of the air purging itself.  We have lots of laundry to do, provisions to add, and holding tanks to empty before we leave for the San Juan and Canadian Gulf Islands tomorrow.

Summary:

We planned to be in the water on September 15th at best and the 19th at worse.  We beat our best estimate by 2 days with the motivation of cost on the hard, Clarice having to scale the 10 ft boarding ladder multiple times a day with her handless crutch, and a desire to get out and enjoy our vacation time.  The cost of moving so quickly was Clarice’s complete exhaustion and upper leg pain and my sciatic pain.  We could not have done this without help from friends and family – again we want to express our deepest appreciation to Darrell Pelley and John Gray! 

We estimated our haul-out and yard costs at $1000 - $2000.  The bill came to about $750.  He first night we stayed as a reciprocal yacht club member thanks to Port Townsend Yacht Club so we paid $5. The Port of Port Townsend doesn’t charge yard storage for the first and last night so we were only charged for 3 nights of yard time.  The bill that really caught us by surprise was from Haven Boatworks.  Their crew was always willing to help if we needed a hand lifting a heavy part, they provided us with a 30 amp electric hookup, they provided us with a key to their facility so Clarice didn’t have to walk nearly as far to get to a restroom and they provided a mechanic who provided the guidance I needed (in addition to pressing bearings for me) and they only charged us for 1 hour of mechanics time.  Our bill from them was less than $100!  Thank you and kudos to everyone we have worked with here in Port Townsend!



Thursday, September 1, 2016

Summer Visitors Entry #2

After getting home from the San Juan Islands and Julia catching her plane back to Chicago our oldest grandson, ET, arrived via Amtrak from Portland to have some time with his cousin.  ET and C are very close and thanks to the wonders of modern communication can play there beloved computer games and communicate in real time on a frequent basis even though they now live about 2500 miles apart.  That said, the reality is that they really look forward to any time they can get together.

My wish is to spend some time showing them the places that I love and things I love to do while I still am able so I took the two of them camping to Mt. Rainier National Park.






In the true tradition of camping, we forgot one vital part to the propane camp stove and so we got to practice cooking over an open fire (in reality the lady in the next campsite offered her stove but it was too good of a chance to pass up for teaching the boys how to make do).  The evening ended with traditional smores.


We always look forward to the arrival of our children and grandchildren but once they leave we get back to enjoying our quiet life.

We are currently prepping for our second haul-out since we have owned Salish Aire.  During the first haul we got concerned about the Naiad stabilizers.  There is some question as to if the bearing grease is still protecting the bearings and if they have gotten water into them at some point. Once the project is complete, I will write up what we have learned.  So far we have gotten a box of parts from Naiad that set us back about $3000, I have cleaned and serviced the hydraulic fluid reservoir, replaced seals in the hydraulic pump, and replaced the leaking shaft seals on the hydraulic cylinders. Once we are out of the water we will pull the main bearings and seals.

Clarice was given the news that after 6 weeks of not bearing weight on her broken foot, it was worse rather than better so she is to stay off it another 4 weeks.  She is NOT a "happy camper". She has purchased an IWalk hands free crutch that makes getting around much easier (I am NOT allowed to call it a "peg leg", and she refuses to wear an eye patch and parrot).  She did demonstrate that she can climb a ladder so we are moving ahead with our plans to live aboard Salish Aire while she is on the hard.



I hope to post only good news about our time out of the water but we are crossing our fingers on that one.



Sunday, July 31, 2016

Wow! Featured blog on the Nordhavn August newsletter.

I was noticing that we had a huge uptick in our readership today.  A bit of sleuthing took us to the August edition of the Nordhavn newsletter and discovering that we are the featured blog of the month.  Considering the quality of the blogs done by other Nordhavn owners, we consider this to be quite the honor.  Thank you Nordhavn!!

Welcome to all new readers! If you have any thoughts or questions then please email us at salishaire_gmail.com (we are trying to outsmart the internet troll bots > change the _ to an @ sign to create the proper address).

Sincerely,
Norman and Clarice Gregory


Mid West Family Summer Visit Entry #1

If you get tired of proud parents/grandparents going on and on about their perfect children and grandchildren then you should probably skip this blog entry.

Our daughter Erin lives in Welland Ontario just north of Niagara Falls with her family, Paul our wonderful son-in-law, 11 year old Calm Big Brother C, 7 1/2 year old Curious and Precocious H, and turned 6 last week Princess Can-Take-Care-of-Herself V.  Also when Erin was in college she lived in my cousin's basement and babysat her children including Julia who is now on summer break from the University of Illinois and came to join us for a few days.

Clarice's knee scooter was an immediate attraction to the grandkids.

H went to work adding to the marina's chalk art collection by making sure Jarvis was immortalized (at least until the next time it rains).

Clarice has mastered the art of going up and down the ramp at all but the most extreme low tides.  She decided to show off by taking a passenger with her.

Grandma getting started on getting her H fix.

V modeled her new swimsuit

C experimented with Aqua Glide

The younger kids checked out the hammocks on the front deck.

Erin and the kids arrived first followed by Paul and Julia.  We had long planned for an outing to the San Juan Islands when everyone was here and with the broken footed Admiral directing the very green deck crew we headed north for 4 days.

Paul learns how to prep the boat for landing.

Beaches to explore.

Sea life to photograph from the dock.

A new anchorage a new adventure.

V goes swimming and PFD testing.

H explores the sea caves.

C learns to paddle the kayak.

Forts must be evaluated for their usefulness in case of a seagull attach.

Julia checks out the galley supplies.

Paul learns to operate an outboard motor.
Everyone likes to eat.
Finally the sun sets over the Sucia Island anchorage with Mt Baker in the distance.


The children sleep very very soundly and don't awaken until the sun is already up in the sky.


After a great 4 days we had to head home to get Julia back to the airport for her flight home. More to follow as the kids are here for some time yet and this evening 13 y/o grandson ET arrives from Portland by train.

Finally we need to re-provision ..... again (7 people seem to eat more than 2!!), and:

Now fully trained, Captain H, Makes sure that Grandpa empties the holding tank correctly.



Saturday, July 23, 2016

Marina Life and a Broken Foot

Living in a boat in a marina has its ups and downs.  We have the daily things to watch living in a basically industrial setting like tugboats towing barges full of shavings down the river (I believe they end up at the paper mill in Port Townsend), rail cars taking a rest on their route from the coal mines of Colorado to the loading dock in Tsawwassen British Columbia (where I expect the coal is shipped to China), oil cars bringing raw crude from the middle of the country to the refinery in Anacortes, and more and more work as the Port of Everett works to change much of the shoreline into a people friendly place after decades of being the industrial hub of the city.  Early this month as part of their project the Port of Everett moved the historic Weyerhaeuser Headquarters Building from out on the main street to its (hopefully) final location (after 2 previous moves) in a park directly across from our slip.

We get gorgeous sunrises and sunsets.

And we get the challenges of living in a non-standard living location. 
Clarice was going down one of the sets of steps on the boat and lost her concentration while calling the dog to bed.  She lost track of where she was and missed a step with the result being two fractured metatarsal bones in her foot.  She has been told NO ("and that means NO!") weight bearing on that foot for at least 6 weeks.  

To make it worse, this happened about 4 days before our daughter and her 3 children were scheduled to make their annual pilgrimage back to the Pacific Northwest from Ontario, Canada.  Whereas Clarice normally looks forward to having "Grandma Time" with the kids playing games, cooking, playing in boats, and playing on the beach but she instead is finding that she needs rest times when she has the children by herself as moving around the boat on knees and crutches is exhausting before adding the challenges of 3 energetic little ones.

On the positive side we have once again been reminded that floating friends are really really good friends.  A quick walk around the dock the evening before I had to go to a 12 hour shift the next day ended up with several promises (which were kept) from fellow boaters that they would entertain the kids while she rested.  I ran into a woman from our yacht club at the local marine hardware who offered to help with housework and / or shopping (Clarice took her up on the shopping offer when we were running out of fruit and milk with 3 hungry kids running around). Today a neighbor stopped in and asked if she needed anything while she was at the store and a loaf of sandwich bread appeared.  

More to come as we are expecting our son -in-law and a niece to arrive the day after tomorrow with a 4  day cruise to the San Juan Islands planned for next week.  One day at a time.


Monday, July 11, 2016

Petersburg Alaska

We are just returning home from spending a few days in Petersburg Alaska with the largest gathering of Nordhavn boats in the history of the brand. This has been a great get-together and we are sorry to see it end.

We couldn't get the time off to attend by boat so we flew up via the Alaska Airlines "Milk Run".  We flew from Seattle to Ketchican  (1 1/2 hr) then on to Wrangle (20 minutes) and finally on to Petersburg (14 minutes) before the plane continued on to Juneau and Anchorage.  The run from Wrangle to Petersburg is so short that the 737 had to fly between the mountains as he followed Wrangle Narrows.  I swear we could have seen a squirrel on the mountain tops at the peak of our flight and were looking up at them as we came in for our landing.


Looking north across the marina towards the Sons of Norway Hall where we met

The North 2 AK rendezvous started as a "gee let's see if a couple of boats want to meet up in Alaska idea" a couple of years ago with the belief that "maybe 4 - 6 boats will show up" according to the organizers.  Once the word got out the interest grew until 30 boats showed up and a number of fly-ins like us bringing the total head count to about 100.  The town of Petersburg reported that this was the biggest thing to hit their tiny borough for some time.  With luck the fishing season opened up in time for the fishing fleet to exit so there was plenty of dock space left for Nordhavns and the sun came out and it was great!

The opening presentation was by Dan Streech, one of the founding fathers of Pacific Asian Enterprises (PAE) that designs and builds Nordhavns.  It was clear from Dan's presentation that he really loves boats and especially Nordhavns.  He talked about how ground breaking it was when hull #001 of the N46 line of boats was launched as the idea of ocean crossing recreational trawlers was still very much in its infancy (and he was very excited to hear that hull #001 was in the marina).

UUB V (Pronounced WB 5, his previous boats were named Water Boy 1-4) - Nordhavn 46 hull #001 that started the line of now 500 boats 
I did an impromptu presentation on repairing Hurricane Heaters which I will try to spruce up and post on-line. There was a presentation on radar which gave us some great pointers and suggested a way that I could tie my electronic displays together to make them more useful. I also found the presentation on AC current leakage to be very helpful.  Clarice visited the women only session and a presentation on docking that helped her better visualize what happens during this critical time of most boat outings. We spent a lot of time visiting other model N46s to get ideas for our boat (we are hull #50 of 81 that were built before the mold was retired making this by far the most successful of the Nordhavn models).  I enjoyed just yaking with Bob Senter of Lugger / Northern Lights company and other gear heads. I think Clarice (AKA the keeper of the boat's appearance) has decided that our Teak will go nude before the summer is out as the boats with no coatings looked good and cut costs and maintenance a bunch.

We were fed and entertained by the local folk in the true Norwegian traditions of smorgasbord (with Clarice's favorite - pickled herring) and folk dancing.

Clarice trying to learn a folk dance from the local kids.
We walked the trails around town and saw eagles and more eagles, deer, a whale, seals, and ravens (who have a vocabulary of sounds which far outdoes anything I've heard from their cousins the crows).  The terrain ranged from muskeg bogs to temperate rain forest and always the scent of local money (AKA fishing industry boats and canneries).

Muskeg bogs cover much of the island. This was across the street from the airport.

North end of Wrangle Narrows just past town.

An eagle on an old shed along Wrangle Narrows (notice the bouy - one of many that must be watched carefully when navigating this very crooked channel.


Salmon Berries

Can anyone identify this flower for us?
Devils Club with very pretty berries (wild blueberries in the background).

Finally the boats were all asked to leave together to provide a photo-op and room for the returning commercial fishing fleet.  Those who could joined together for one last night in a local cove / anchorage while we flew back to Seattle.


Sunday, June 19, 2016

Father's Day Weekend Outing

Clarice was pretty adamant that we were going to get away from our home marina for Father's Day Weekend.  In the end, she was right and we had a wonderful time.

Goal number 1 was to install and try out our new solar array. Salish Aire originally came to us with solar panels installed which were a really BIG selling point especially to Clarice as her dream has always been quiet anchorages with NO GENERATOR NOISE.  We knew when we bought the boat that the panels were likely at or near the end of their life but recognized that at least we had a solar infrastructure in place (controller, wiring, etc.).  With some repairs we have managed to get the old panels to limp along but when we met John (AKA "Solar Guru") at http://www.rainshadowsolar.com/ while visiting Orcas Island a couple of months ago he supported our belief that it was time to change out the panels.  He also indicated that whomever had installed the panels had put in an excellent ("way ahead of its time") solar controller that was well worth keeping. He recommended very high-end panels by Sunpower company ( https://us.sunpower.com/solar-panels-technology/x-series-solar-panels/ ) because of their higher watt density, tolerance for heat variation as we plan to travel from upper latitudes to lower latitudes in the future, ability to continue power production while partially shaded, and general durability.

New Sunpower Solar Panels (we mounted then 18" above deck  to allow for storage under them)


We were able to meet up with John and install the panels between Thursday and Friday so our plan was to find a nice anchorage and see what happened.

Our initial plan was to go to Ft. Flagler State Park ( http://parks.state.wa.us/508/Fort-Flagler ) but while we were underway Clarice did some research and asked if we should instead travel down Hood Canal (not really a canal but rather a natural fjord in the Puget Sound section of the Salish Sea) to Pleasant Harbor where the guidebook indicated we could anchor out and pay a fee to the marina ( http://pleasantharbormarina.com/ ) to use their pool and hot tub.  The guidebook turned out to be outdated in its information as the marina has not been able to address legal concerns related to making their hot tub and pool public.  They did offer that for a minimum $35 moorage fee (normal fee $1.50/ft = $69 for Salish Aire or the $35 minimum for our dingy) we could use the facilities.  One of the few things I have really missed after moving aboard is having a hot tub.  I have some minor neural damage in my spine that irritates my legs frequently and heat seems to be the best medicine.  With this in mind we decided our "Father's Day Splurge" would be to pay $35 for the dingy.  Clarice got to talking with the proprietor who asked if we were yacht club members.  In the end we were able to use our reciprocal moorage for $5/day and enjoyed their very nice facilities (including a live concert Saturday evening).

Hood Canal looking South with Bangor Naval Submarine Base on the west shore


 We had clouds for most of the weekend with some rain and thundershowers but despite the less than ideal solar conditions we were able to "make" 1.2 kw yesterday and to replace losses from our overnight power use!!  Woohoo, this gives us hope that we should be able to sit an anchor without using our generator for purposes other than watermaking and using the washer/dryer.

Solar Controller showing panels are actually making power
Our maintenance frustrations for the weekend were the Hurricane Furnace (which I thought had agreed to a truce of sorts) decided to have a flame-out issue that I haven't figured out yet and the wing engine still doesn't start perfectly each and every time I ask it to.  I think that both of these devices conspire together keep me humble about my mechanical troubleshooting ability.  It seems that every time I dare brag about my prowess in having conquered their idiosyncrasies they put me back in my place.  Oh well - it's a boat.

Clarice did make a lovely breakfast for Father's Day while we were underway. She discovered a waffle bar maker that makes waffles in a form where they can be dipped if one chooses to eat them that way.  She then added homemade strawberry jam and dark amber maple syrup that our daughter buys us direct from a farm near her home in Ontario.

Father's Day Breakfast (the string from the lantern keeps in from swinging under way, a chrome screw hides the hole in the table when the eye screw is removed)
We are now on our way home which took us back under the Hood Canal Floating Bridge (trivia:  Washington State is famous for having some of the world's longest and oldest floating bridges AND for having 2 of them sink in storms (which is a cleaver way to get Federal funding for replacing them!)).

Hood Canal Floating Bridge looking from the south (it had just closed after opening for a sailboat but we fit under the Eastern High-rise section so we don't require it to open much to the appreciation of the folks in cars)